Gearhead Thread
- Strat
- Waiting for HVAC Repairman
- Posts: 35416
- Joined: Tue January 01, 2013 3:48 pm
- Location: Twin City Kisses
Re: Gearhead Thread
The problem is though...shit in ...shit out.
I dont really know how to lay down a basic guitar track in a way that could be utilized for a full band recording. Volume levels etc... All i know is to not lay it down too loud.
I dont really know how to lay down a basic guitar track in a way that could be utilized for a full band recording. Volume levels etc... All i know is to not lay it down too loud.
- Self
- Polluted
- Posts: 4662
- Joined: Tue January 01, 2013 10:27 am
- Location: PM me, I have everything.
Re: Gearhead Thread
Mic it, Strat. SM57 is all I've ever used. Get an affordable interface and a DAW. There are a ton of affordable/free options that are more than what you need. Arm your track, hit the strings hard, and adjust the input volume so it doesn't go red; tickling the orange is ok. You'll be surprised what a jackasss in a bedroom can create. I know I am.Superblood Wolfmoon wrote:You usually can't go wrong with a $100 Shure SM57.
- Strat
- Waiting for HVAC Repairman
- Posts: 35416
- Joined: Tue January 01, 2013 3:48 pm
- Location: Twin City Kisses
Re: Gearhead Thread
I have an m audio podcast usb interface and I use garage band. I’ve had fine luck but guessing I’m missing out. I have only mic an acoustic guitar through but sure it’s just a shitty vocal micSelf wrote:Mic it, Strat. SM57 is all I've ever used. Get an affordable interface and a DAW. There are a ton of affordable/free options that are more than what you need. Arm your track, hit the strings hard, and adjust the input volume so it doesn't go red; tickling the orange is ok. You'll be surprised what a jackasss in a bedroom can create. I know I am.Superblood Wolfmoon wrote:You usually can't go wrong with a $100 Shure SM57.
Otherwise just gone amp to m Audio to computer.
Should I upgrade my equipment and software ?
- tragabigzanda
- Production Police
- Posts: 51690
- Joined: Tue September 24, 2013 5:56 pm
Re: Gearhead Thread
tragabigzanda wrote:I'd maybe bump Life & Limb for Epic Problemtragabigzanda wrote:Top 10 maybe?
Hello Morning
Close Captioned
The Kill
Place/Position
Do You Like Me?
Latest Disgrace
Recap Modotti
Nightshop
Break
Life & Limb
Last edited by tragabigzanda on Mon January 12, 2026 11:53 am, edited 1 time in total.
- Self
- Polluted
- Posts: 4662
- Joined: Tue January 01, 2013 10:27 am
- Location: PM me, I have everything.
Re: Gearhead Thread
Not sure about the m audio thing. Does it have XLR inputs? If it does, all you'd need is a decent mic to record the amp. Whatever software you're using is fine, like Trag said.Strat wrote:I have an m audio podcast usb interface and I use garage band. I’ve had fine luck but guessing I’m missing out. I have only mic an acoustic guitar through but sure it’s just a shitty vocal micSelf wrote:Mic it, Strat. SM57 is all I've ever used. Get an affordable interface and a DAW. There are a ton of affordable/free options that are more than what you need. Arm your track, hit the strings hard, and adjust the input volume so it doesn't go red; tickling the orange is ok. You'll be surprised what a jackasss in a bedroom can create. I know I am.Superblood Wolfmoon wrote:You usually can't go wrong with a $100 Shure SM57.
Otherwise just gone amp to m Audio to computer.
Should I upgrade my equipment and software ?
- Superblood Wolfmoon
- AnalLog
- Posts: 1867
- Joined: Thu November 21, 2013 10:01 pm
Re: Gearhead Thread
Here's the thing with recording. You don't know shit until you start doing it. Nobody gets hurt in the process, you just hit undo and try again until you get something that sounds right. Anyway, step back from thinking about full band recordings and just take it one step at a time, and above all have fun!Strat wrote:The problem is though...shit in ...shit out.
I dont really know how to lay down a basic guitar track in a way that could be utilized for a full band recording. Volume levels etc... All i know is to not lay it down too loud.
I'm trying real hard to be the shepherd.
- Strat
- Waiting for HVAC Repairman
- Posts: 35416
- Joined: Tue January 01, 2013 3:48 pm
- Location: Twin City Kisses
Re: Gearhead Thread
Oh I’ve done plenty of solo recording. Sometimes I get decent results. But I want to take it a step further now - hence the discussionSuperblood Wolfmoon wrote:Here's the thing with recording. You don't know shit until you start doing it. Nobody gets hurt in the process, you just hit undo and try again until you get something that sounds right. Anyway, step back from thinking about full band recordings and just take it one step at a time, and above all have fun!Strat wrote:The problem is though...shit in ...shit out.
I dont really know how to lay down a basic guitar track in a way that could be utilized for a full band recording. Volume levels etc... All i know is to not lay it down too loud.
Feel free to check out my “strat noodles” post in the release forum
- Superblood Wolfmoon
- AnalLog
- Posts: 1867
- Joined: Thu November 21, 2013 10:01 pm
Re: Gearhead Thread
Strat wrote:Oh I’ve done plenty of solo recording. Sometimes I get decent results. But I want to take it a step further now - hence the discussionSuperblood Wolfmoon wrote:Here's the thing with recording. You don't know shit until you start doing it. Nobody gets hurt in the process, you just hit undo and try again until you get something that sounds right. Anyway, step back from thinking about full band recordings and just take it one step at a time, and above all have fun!Strat wrote:The problem is though...shit in ...shit out.
I dont really know how to lay down a basic guitar track in a way that could be utilized for a full band recording. Volume levels etc... All i know is to not lay it down too loud.
Feel free to check out my “strat noodles” post in the release forum
I'm trying real hard to be the shepherd.
- Strat
- Waiting for HVAC Repairman
- Posts: 35416
- Joined: Tue January 01, 2013 3:48 pm
- Location: Twin City Kisses
Re: Gearhead Thread
I did it guys. The marshall is on its way.
I also needed to purchase a separate reverb pedal, went with the Keely Omni reverb, so as to not miss the fender twin reverb too much while playing through my new baby.
I also needed to purchase a separate reverb pedal, went with the Keely Omni reverb, so as to not miss the fender twin reverb too much while playing through my new baby.
-
doug rr
- The Master
- Posts: 27424
- Joined: Tue January 01, 2013 3:45 pm
- Location: I'm now Canadian..go broncos
Re: Gearhead Thread
- Strat
- Waiting for HVAC Repairman
- Posts: 35416
- Joined: Tue January 01, 2013 3:48 pm
- Location: Twin City Kisses
Re: Gearhead Thread
heavens no. Its my first born and favorite.doug rr wrote:you can send me the twin reverb if you don't want it
can't have too many pony's in the stall, you know what i mean?
-
doug rr
- The Master
- Posts: 27424
- Joined: Tue January 01, 2013 3:45 pm
- Location: I'm now Canadian..go broncos
Re: Gearhead Thread
I'm thinking about getting one of those small fender acoustic ampsStrat wrote:heavens no. Its my first born and favorite.doug rr wrote:you can send me the twin reverb if you don't want it
can't have too many pony's in the stall, you know what i mean?
- tragabigzanda
- Production Police
- Posts: 51690
- Joined: Tue September 24, 2013 5:56 pm
Re: Gearhead Thread
Last edited by tragabigzanda on Mon January 12, 2026 11:49 am, edited 1 time in total.
- Strat
- Waiting for HVAC Repairman
- Posts: 35416
- Joined: Tue January 01, 2013 3:48 pm
- Location: Twin City Kisses
Re: Gearhead Thread
I'm road ready. lets go.
- Self
- Polluted
- Posts: 4662
- Joined: Tue January 01, 2013 10:27 am
- Location: PM me, I have everything.
Re: Gearhead Thread
Jealous. Don't forget a short pedal cable so you can jump the channels! I bet it's gonna sound awesome.
- Strat
- Waiting for HVAC Repairman
- Posts: 35416
- Joined: Tue January 01, 2013 3:48 pm
- Location: Twin City Kisses
Re: Gearhead Thread
I've got plenty. Now just have to figure out how exactly it might all work. I can blend them as well too?Self wrote:Jealous. Don't forget a short pedal cable so you can jump the channels! I bet it's gonna sound awesome.
- Self
- Polluted
- Posts: 4662
- Joined: Tue January 01, 2013 10:27 am
- Location: PM me, I have everything.
Re: Gearhead Thread
Oh, you can blend them just like a Plexi. Each has a loudness knob, at least the head I was looking at did. This should too. Same thing with a speaker, I think.Strat wrote:I've got plenty. Now just have to figure out how exactly it might all work. I can blend them as well too?Self wrote:Jealous. Don't forget a short pedal cable so you can jump the channels! I bet it's gonna sound awesome.
- wease
- Major Dude
- Posts: 40664
- Joined: Sat January 05, 2013 1:57 pm
- Location: Where everybody knows your name
Re: Gearhead Thread
Awesome, strat. Let’s zoom jam.
Let me tell you, Homer Simpson is cock of nothing!
- C. Montgomery Burns
- C. Montgomery Burns
- Strat
- Waiting for HVAC Repairman
- Posts: 35416
- Joined: Tue January 01, 2013 3:48 pm
- Location: Twin City Kisses
Re: Gearhead Thread
had to upgrade my pedal board. Been a long time since ive changed my set up. So, for when im not using my fender twin:

And my "go to" overdrive has been acting up lately so i will now be adding this to the board as well:


And my "go to" overdrive has been acting up lately so i will now be adding this to the board as well:

- Self
- Polluted
- Posts: 4662
- Joined: Tue January 01, 2013 10:27 am
- Location: PM me, I have everything.
Re: Gearhead Thread
Nice. I have the regular OCD and it's great pedal. When I use the VTM I have it set for just a tad of breakup with the volume down on the guitar a hair. I use the OCD to gently nudge it over the edge. With the classic, I use it on the clean channel to get into the rock tone area. It'll also approach full bore shred, but that's not really my thing.Strat wrote:And my "go to" overdrive has been acting up lately so i will now be adding this to the board as well: