Page 44 of 86

Re: Gearhead Thread

Posted: Mon May 18, 2020 10:52 pm
by Strat
the Geranium OCD is super fantastic. It can stand on its own no problem as the main overdrive. Super versatile also in that using it as a boost or back up in other tonezones.

Re: Gearhead Thread

Posted: Mon May 18, 2020 11:27 pm
by Strat
The Channel 2 tone....the high treble tone is VERY high treble. Not really my favorite. Blending the two channels makes for a pretty hot amp that doesnt really bode well for bedroom playing but I do love it.

Re: Gearhead Thread

Posted: Mon May 18, 2020 11:28 pm
by Self
Strat wrote:Image

Hello there. With a just a few moments of getting acquainted, this is exactly what I've wanted. I definitely get more appealing tones at lower volume! Though, its still a loud amp!

Still have to mess around with it quite a bit and figure out my sweet spots but im very very pleased.
I wanna come over and play.

Re: Gearhead Thread

Posted: Mon May 18, 2020 11:31 pm
by Self
Yeah, even 5 watts is still loud. And when I switch mine down to one? Mud. It's still nice to be able to go that low, but if you really want it to sound good, it's gonna be loud. Gotta move that air.

Re: Gearhead Thread

Posted: Mon May 18, 2020 11:35 pm
by Birds in Hell
Strat wrote:The Channel 2 tone....the high treble tone is VERY high treble. Not really my favorite. Blending the two channels makes for a pretty hot amp that doesnt really bode well for bedroom playing but I do love it.
This is one of the things I've struggled with on my JTM45/Bluesbreaker. The "normal" input is very dark and the "bright" input is very, very bright at lower volumes. At higher volumes, things even out a little more, but then it's just way too loud to comfortably play at home. Even at a gig, it's arguably too loud for most situations, and I'm not playing out right now in any case.

Re: Gearhead Thread

Posted: Mon May 18, 2020 11:50 pm
by Self
Bright cap? You could snip it, if you wanna play at lower volumes.

Re: Gearhead Thread

Posted: Mon May 18, 2020 11:53 pm
by Self
I've been able to leave mine in on the VTM, but I don't play a tele. I'd imagine that's rough. Roll back the tone on the LP, and it's fine. Even on the P90s.

Re: Gearhead Thread

Posted: Tue May 19, 2020 12:02 am
by Birds in Hell
Self wrote:Bright cap? You could snip it, if you wanna play at lower volumes.
Yeah. I've thought about it, but it's still so loud and so heavy.

I'm really looking for something to get me in that Bill Frisell ballpark tonally, and a crankin' Marshall really isn't built for that:


Re: Gearhead Thread

Posted: Tue May 19, 2020 12:09 am
by Strat
Birds in Hell wrote:
Strat wrote:The Channel 2 tone....the high treble tone is VERY high treble. Not really my favorite. Blending the two channels makes for a pretty hot amp that doesnt really bode well for bedroom playing but I do love it.
This is one of the things I've struggled with on my JTM45/Bluesbreaker. The "normal" input is very dark and the "bright" input is very, very bright at lower volumes. At higher volumes, things even out a little more, but then it's just way too loud to comfortably play at home. Even at a gig, it's arguably too loud for most situations, and I'm not playing out right now in any case.
I get so much variety from all my boosts and pedals that i can work with the normal input.

Im really thinking an attenuator might be necessary these days. I tried one years ago and hated how clipped it all sounded. But perhaps i just need a better one....

Re: Gearhead Thread

Posted: Tue May 19, 2020 1:58 pm
by Strat
Anyone ever soundproofed their bedroom?

I live in a semidetached home. Meaning, i share a party wall with my neighbors. The room I play guitar in does not share a wall with my neighbors (thank goodness), but i am sure they can still hear me.

I really want to play without concern.

Re: Gearhead Thread

Posted: Wed May 20, 2020 1:28 pm
by mf
I don't know how much useful info i can add but i've looked into it a bit in the past because i'm in a similar situation. My takeaway was that true soundproofing is very difficult and expensive to achieve. The ideal solution involves building a room inside a room which has no structural contact with the building, and that dampens most of the offending sound waves from getting out. Also getting rid of windows. Surface treatments like foam padding or paneling don't do a whole lot.

I just ended up talking to my neighbors and they said they can sometimes hear me but it's never a bother so just keep doing what i'm doing. I don't play overly loud though.

Re: Gearhead Thread

Posted: Wed May 20, 2020 3:03 pm
by Strat
mf wrote:I don't know how much useful info i can add but i've looked into it a bit in the past because i'm in a similar situation. My takeaway was that true soundproofing is very difficult and expensive to achieve. The ideal solution involves building a room inside a room which has no structural contact with the building, and that dampens most of the offending sound waves from getting out. Also getting rid of windows. Surface treatments like foam padding or paneling don't do a whole lot.

I just ended up talking to my neighbors and they said they can sometimes hear me but it's never a bother so just keep doing what i'm doing. I don't play overly loud though.
Perhaps I should just throw a weighted blanket over my amp. Or pay my neighbors to leave for aw eek

Re: Gearhead Thread

Posted: Wed May 20, 2020 3:07 pm
by tragabigzanda

Re: Gearhead Thread

Posted: Wed May 20, 2020 3:11 pm
by bada
Strat wrote:Image

Hello there. With a just a few moments of getting acquainted, this is exactly what I've wanted. I definitely get more appealing tones at lower volume! Though, its still a loud amp!

Still have to mess around with it quite a bit and figure out my sweet spots but im very very pleased.
I have the same strat and tele. :D

Re: Gearhead Thread

Posted: Wed May 20, 2020 3:15 pm
by Strat
tragabigzanda wrote:
Strat wrote:
mf wrote:I don't know how much useful info i can add but i've looked into it a bit in the past because i'm in a similar situation. My takeaway was that true soundproofing is very difficult and expensive to achieve. The ideal solution involves building a room inside a room which has no structural contact with the building, and that dampens most of the offending sound waves from getting out. Also getting rid of windows. Surface treatments like foam padding or paneling don't do a whole lot.

I just ended up talking to my neighbors and they said they can sometimes hear me but it's never a bother so just keep doing what i'm doing. I don't play overly loud though.
Perhaps I should just throw a weighted blanket over my amp. Or pay my neighbors to leave for aw eek
Every cat turd that winds up in your yard = One hour of noise at 80db
Luckily i dont share a wall with those neighbors! Just a fence line!

Re: Gearhead Thread

Posted: Wed May 20, 2020 5:02 pm
by surfndestroy
Have you thought of putting up ver heavy curtains about two inches from the neighbour facing wall(s)?

Re: Gearhead Thread

Posted: Wed May 20, 2020 5:16 pm
by Strat
The scene:

Image

Re: Gearhead Thread

Posted: Wed May 20, 2020 5:47 pm
by tragabigzanda

Re: Gearhead Thread

Posted: Wed May 20, 2020 5:48 pm
by tragabigzanda

Re: Gearhead Thread

Posted: Wed May 20, 2020 5:50 pm
by Strat
tragabigzanda wrote:Making a space suitable for the composition of music is always difficult if the room is doubling for something else. But if you’re able to make it solely for that purpose, then why hold back?
Because its the bedroom you and your lovely family are gonna have to sleep in when you visit. its also my office.